Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car

Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Electric equipment of the engine
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
- Transmission line
   Specifications
   Driveshafts and hinges - the general information
   Check of a condition of the transmission line
   Removal and installation of the driveshaft
   Replacement of cardan hinges
   Driving shaft / half shafts, - the general information and check of a state
   Removal and installation of half shafts, bearings and epiploons of the back bridge
   Replacement of an epiploon of the leading gear wheel of differential
   Removal and installation of assembly of the back bridge
   Removal and installation of power shafts
   Replacement of protective covers and service of CV JOINTS
   Removal and installation of assembly of forward differential
   Removal and installation of naves with the switched-off drive
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Specifications

General parameters

Characteristic	Value
Transfer relation of the main transfer of a transfer case (H4/L4)	1.000/2.488
Axial side play of the cardan hinge, mm	0.05
Beating of a flange of forward differential, mm	0.1
Pretightness of the bearing of a forward nave, Nanometer	28 ÷ 56
Pretightness of the bearing of a back nave, Nanometer	26 ÷ 57
Pretightness of the leading gear wheel of forward differential, Nanometer	0.4 ÷ 0.8
Pretightness of the leading gear wheel of back differential, Nanometer	0.6 ÷ 1.0
Depth of installation of an epiploon of differential, mm	1
Distance from a half shaft case cut to an end face of a nut, mm	0.2 ÷ 0.9

Efforts of a tightening of threaded connections, Nanometer

Driveshafts

Bolts of fastening of the top dustproof cover

Characteristic	Value
Flange bolts / nuts
Forward shaft	74
Back shaft	88
Fixture of dustproof covers of a shaft
Lower cover
Bolts	17
Nuts	13
The top cover (address to an illustration above)
A bolts	36
B bolts	23

Power shafts and half shafts

Characteristic	Value
Adjusting nut of a pretightness of the bearing of a nave, Nanometer
1st stage	59
The 2nd stage (after a nave provorachivaniye)	59
3rd stage	to weaken to possibility of rotation by a hand
4th stage	5
Nut of a flange of forward differential	196
Nut of a flange of back differential	245
Effort of a tightening of a nut of a flange of differential for one approach	13
Maximum effort of a tightening of a nut of a flange of forward differential	343
Maximum effort of a tightening of a nut of a flange of back differential	441
Nuts of fastening of forward differential	25 – 27
Bolts of fastening of back differential	73
Bolt of fastening of the ABS sensor	18
Collars of fastening of conducting of the ABS sensor	8
Wheel nuts	131
Nuts of fastening of the case of a nave	31
Nave bearing nut	274
Bolts of fastening of a cover of a nave	10
Bolts of fastening of the protection cover to a rotary fist	18
Brake disk to a nave	64
Flexible hose to a support of the brake mechanism	30
The shock-absorber to a frame	25
The shock-absorber to the lower lever of a suspension bracket	39
Stabilizer arm to a frame	29