Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
- Settings and routine maintenance of the car
Specifications
Schedule of routine maintenance
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the AT working liquid
Check of level of liquid of the power steering
Replacement of motive oil and oil filter
Check, service and charging of a battery room
Check of a condition of components of the cooling system
Check of a state and replacement of the hoses located in a motive compartment
Check of a state and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of greasing in a transfer case
Check of level of greasing of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of the operated ventilation of a case (PCV)
Replacement of the filtering air cleaner element
Check of a state, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of brake system
Adjustment of height of situation and free wheeling of a pedal of a brake
Check of a state and replacement of spark plugs (petrol engines)
Check and adjustment of gaps of valves
Replacement of the fuel filter
Check and service of the conditioner of air (To/in)
Service of the cooling system
Check of a state, stuffing by greasing and adjustment of forward naves and wheel bearings
Replacement of ATF of automatic transmission and main transfer
Replacement of greasing of a transfer case
Differential greasing replacement
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of recirculation of the fulfilled gases (EGR)
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Electric equipment of the engine
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check, service and charging of the battery
|
|
Performance of checks of a state and service of the battery demand observance of some special precautionary measures. Remember that the hydrogen emitted by electrolyte is explosive gas in the highest measure. Do not smoke, and do not come nearer to a venue of works with naked flame or the lit cigarette! Do not forget that actually electrolyte represents the diluted sulfuric acid which at hit in eyes or on open sites of a body is capable to cause strong chemical burns. Electrolyte also easily can damage fabric of clothes and a paint and varnish covering of body panels! |
|
|
At shutdown of the battery always disconnect from it first of all a negative wire, it is necessary to connect it the last! |
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery, make sure that have the correct combination for input of the audio system in action! |
Preparation
Tools and materials necessary at service of the battery
|
|
1. The conscientious attitude to performance of procedures of the routine preventive maintenance of the battery is the only pledge of fast and trouble-free start of the engine. Before undertaking service of the battery, make sure available near at hand all necessary materials and tools guaranteeing safety of work (address to an illustration above).
2. There is also a number of additional precautionary measures which have to be observed when carrying out service of the battery. Before starting performance of work, without fail kill the engine and switch off everything consumers of the electric power. Disconnect a negative wire from the battery.
3. Remember that in banks of the battery the hydrogen which is not only is emitted with easily flammable, but also explosive gas. Do not come nearer to a venue of works with naked flame or the lit cigarette at all, try to use only the neiskroobrazuyushchy tool. Make charging of the battery in well ventilated room.
4. Electrolyte represents solution of the sulfuric acid which is relating not only to the category of toxic chemical compounds, but being also extremely chemically aggressive substance. Do not allow hit of electrolyte in eyes, on open sites of a body and articles of clothing. Carrying out service of the battery, put on goggles and gloves, do not allow children to come nearer to a venue of works.
5. Study an external condition of the battery. If the positive plug of the battery with the clip which is put on it is equipped with a rubber protector, make sure that the last is not damaged mechanically. The protector has to cover metal components of terminal connection completely. Check a state and reliability of fastening of terminal connections, examine a casing and a cover of the battery on existence of cracks and other damages of a mechanical sort. Make sure of reliability of a tightening of clamping nuts. Estimate a condition of isolation of wires of the battery on all their length. |
|
Service
|
|
|
|
1. In case of detection on a surface of the battery of traces of corrosion in the form of a white powdery raid (address to an accompanying illustration), in particular near the locations of plugs, it is necessary to remove the battery from the car for carrying out careful external cleaning. Weaken a wrench bolts of terminal clips (at first the negative!) and carefully disconnect from the wire battery. |
2. Give fixture of a clamping level, lift the last and take the battery from a motive compartment.
3. Carefully smooth out contact surfaces of terminal clips of wires and polar plugs of the battery special brushes with use of solution of baking soda. The same solution wash out a surface and covers of the battery. Watch that solution did not get in cans. Make cleaning in a protective mask / points and rubber gloves in order to avoid hit of particles of acid in eyes and on hands. Try to pick up also the corresponding clothes which will not be a pity for throwing out then. Having finished cleaning, rinse the processed surfaces with fresh water.
4. Check a condition of the pallet of the battery, its support and fixture of a clamping level. Wash out the pallet solution of baking soda; process the sites damaged by corrosion a primer on a zinc basis.
5. Before installation of the battery make sure that on the pallet no tools and materials are left. Do not draw excessively fixture of a clamping level.
6. For protection of terminal connections against corrosion establish on polar plugs of the battery in a special way the processed felt washers. Having connected wires, cover terminal knots with acid-free vaseline. Remember that the negative wire is always connected in the last turn!
7. Track reliability of a tightening of fixture of a clamping level (do not draw bolts). |
|
Charging
|
|
During charging in banks of the battery there is an allocation in the highest measure of easily flammable and explosive hydrogen! Do not smoke, do not come nearer to charging place with naked flame. Coming nearer to a battery installation site, put on goggles. Before connecting the battery to the charger, or to disconnect it, make sure that the device is switched-off from food. |
|
|
Authors of the present manual recommend to make battery charging out of the car as the gas which is allocated during procedure performance is chemically aggressive in relation to paint and varnish coverings. Remember that performance of fast recharge without detachment from the battery of wires can lead to failure of components of electric equipment of the car.
|
In the best way of restoration of level of a charge of the battery which sat down to such an extent when it becomes incapable to provide start of the engine, its slow charging is. This way of charging is also optimum for batteries of the cars used in the mode of short trips. Preservation of level of a charge of the battery is of particular importance in a winter season when the most adverse conditions from the point of view of load of the accumulator are created, and also during the complicated starts of the engine and the increased intensity of functioning of consumers of the electric power.
It is best of all to use the device for continuous recharge by small current (1 2 And) sometimes called by also drop zaryazhatel). Such chargers provide the optimum mode of charging of the battery with the minimum load of the last. For faster recharge of the battery it is possible to use the power supply of bigger current. Remember, however, that the maximum admissible force of charging current should not exceed 1/10 from the battery capacity size (its ampere sentry of the characteristic). At the forced charging, according to some users allowing to restore charge level in one-two hours, load of the battery becomes so high that quite often there is its irreversible exit out of operation, try to avoid such way of recharge, resorting to it only in extraordinary emergencies.
The average duration of the period of charging of the battery has to be specified in the instruction attached in a set to the charger. Usually it makes from 12 to 16 hours.
|
|
1. Uncover mouths of all cans of the battery (if those are provided) and an opening zakuporta pure rags in order to avoid electrolyte slopping. Disconnect a negative wire from the battery and, observing polarity, connect clips of tips of wires of the charger to battery plugs (positive positive, negative negative). Turn on the charger in a network. If the device is equipped with the selector switch, make sure that the last is established in situation for 12 Century.
2. When using the power supply with charging current over two amperes regularly check the battery, watching that there was no its overheat. During slow charging after initial two-hour control it is possible to leave the battery safely to be charged without supervision on all night long.
3. If banks of the charged battery are equipped with jellied mouths with removable covers, try to check hourly within the first several hours of charging the specific weight of electrolyte. Especially for this purpose rather cheap devices called by areometers are issued to get which it is possible practically in any shop of automobile accessories. When using of the areometer follow the instructions of manufacturers attached to it. Continue battery charging until during the last two hour measurements change of density of electrolyte on condition of its free "boiling" (puzyreniye) in banks does not stop. Remember that in the serviceable battery the difference between the specific weight of electrolyte in all banks has to be very small. |
|
Some batteries are placed in the soldered case and equipped with the built-in areometer allowing to determine visually battery charge level by coloring of a color spot in an observation port of the case. Usually, bright coloring of a color spot testifies to the high level of a charge of the battery; darkening of a spot says that the battery needs recharge.
In batteries with the tight case without the built-in areometer (the charge level indicator) check of level of a charge can be carried out by connection to voltmeter battery plugs. The output tension of completely charged battery has to make not less than 12.6 In the ambassador of removal of a superficial charge.
|
|