Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Electric equipment of the engine
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
+ Brake system
- Suspension bracket and steering
Specifications
Removal and installation of forward shock-absorbers
Removal and installation of the forward stabilizer of cross stability
Removal and installation of assembly of a rotary fist with a nave
Check of a state and replacement of spherical support
Removal and installation of the torsion bars
Removal and installation of the top managing director of the lever of a forward suspension bracket
Removal and installation of the lower managing director of the lever of a forward suspension bracket
Removal and installation of back shock-absorbers
Removal and installation of a bar of the back stabilizer of cross stability
Removal and installation of a jet bar
Removal and installation of a screw spring of a back suspension bracket
Removal and installation of levers of a back suspension bracket
Removal and installation of a steering wheel
Check of a state, removal and installation of drafts of the steering drive
Replacement of protective covers of assembly of the steering mechanism
Removal and installation of the steering mechanism
Removal and installation of the steering pump
Removal of air from a hydraulic path of system of strengthening of a wheel
Wheels and tires - the general information
Corners of installation of wheels
+ Body
+ Onboard electric equipment
|
Removal and installation of the top managing director of the lever of a forward suspension bracket
Details of installation of the top lever of a suspension bracket
|
|
1. Details of installation of the top lever of a suspension bracket are given on an illustration above.
2. Cock the parking brake. Weaken nuts of fastening of the corresponding forward wheel. A car front also establish to Poddomkratta it on props. Remove a wheel and its loker.
3. Remove a support of the brake mechanism and tie up it aside to a suspension bracket element (see the Head Brake system).
4. Remove from the top lever of a suspension bracket basic arms of a brake hose and, on models with ABS, from an electrical wiring of the wheel sensor.
5. Prop up the lower lever of a suspension bracket a cart jack.
|
|
The lever has to remain propped up during the whole time of performance of procedure. |
6. Remove the torsion bar (see the Section Removal and installation of the torsion bars).
7. Disconnect from the top lever of a suspension bracket a rotary fist (see the Section Removal and installation of assembly of a rotary fist with a nave).
|
|
8. Note the provision of cams of adjustment of disorder on a body, give nuts and remove cams (address to an accompanying illustration). |
9. Remove the top lever of a suspension bracket.
10. Estimate a condition and degree of wear of plugs. Replace defective components, replacement has to be made in the conditions of a workshop of car service.
11. Installation is made upside-down. Track that all fixture was tightened with the demanded effort. It will be reasonable to make check and adjustment of corners of installation of forward wheels. |
|
|
|
