1. After performance of any procedures connected with a detachment of lines of system of hydrostrengthening of a wheel it is necessary to remove air from a hydraulic path of GUR. Otherwise efficiency of functioning of the steering amplifier considerably will decrease. 2. Develop forward wheels of the car in rectilinear situation and check liquid level in the tank of system of GUR (see the Head Nastroyki and routine maintenance of the car). In case of need make the corresponding adjustment (level of liquid has to reach the lower point of COLD in a tank wall). 3. Start the engine and leave it working for 1000 rpm. Double-check liquid level in the GUR tank. In case of need again make adjustment. 4. Here and there (without blows in the ends of the course) remove with rotation of a steering wheel from system air (watch that liquid level in the tank during pumping did not fall below an admissible limit). 5. Having finished pumping, return wheels to rectilinear situation, let's the engine work within several more minutes, then muffle it. 6. Make trial runs of the car, checking serviceability and noiselessness of functioning of steering system. 7. Double-check the level of hydraulic liquid at the engine, heated-up up to the normal working temperature (this time it has to reach a mark of NOTES in a tank wall). In case of need make necessary adjustment (see the Head Nastroyki and routine maintenance of the car). |
|