Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Electric equipment of the engine
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ gear shifting Box
+ Transmission line
- Brake system
Specifications
System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
Replacement of brake shoes
Removal and installation of supports of disk brake mechanisms
Check of a state, removal and installation of a brake disk
Removal and installation of the main brake cylinder (MBC)
Check of a state and replacement of brake lines and hoses
Sensitive to loading / perepusknoy valve (LSP & BP)
Adjustment of the parking brake
Replacement of cables of the drive of the parking brake
Check of serviceability of functioning / tightness, removal and installation of the amplifier of brakes
Pumping of brake system
Adjustment of a pedal of a foot brake
Check of serviceability of functioning and replacement of the sensor switch of stoplights
Sensors and activator of ABS system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Adjustment of the parking brake
|
|
1. Raising and an otpuskaniye of the parking brake is made by means of the control lever located between forward seats. The regulators which are built in in mechanisms of the parking brake automatically compensate wear of brake boots. Nevertheless, the gradual pulling of a driving cable results in need of performance of additional adjustments over time. Full raising of the parking brake on models is made at a pulling of the handle of management on 6 – 8 clicks of a ratchet.
2. Release the lever of the parking brake.
3. Remove the central console (see the Head Kuzov).
|
|
4. Rotation of a lock-nut (address to an accompanying illustration) make adjustment of a tension of a driving cable, achieving full raising of the parking brake at a lever pulling on the demanded number of clicks of the ratchet mechanism. |
5. Install into place the central console (see the Head Kuzov). |
|
|
|
