Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.3. Running gear
4.4. Forward suspension bracket
4.4.1. Removal and installation of the stabilizer of the forward bridge
4.4.2. Removal and installation of a rotary fist
4.4.3. Removal and installation of the lever of an independent suspension bracket
4.4.4. Replacement of all rubber bearings of the stabilizer
4.4.5. Removal and installation of an amortization rack with the shock-absorber
4.4.6. Dismantling and assembly of an amortization rack
4.5. Back suspension bracket
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












4-4-3-snyatie-i-ustanovka-rychaga-nezavisimojj-podveski.html

4.4.3. Removal and installation of the lever of an independent suspension bracket

Removal
Remove a forward wheel.
Note situation concerning a wheel nave.
Remove directing hinge from a rotary fist.
Unscrew the screw 1.
Remove the lever of an independent suspension bracket from the case of the forward bridge ahead and behind.
Unscrew the screw with a nut 3.
Unscrew the screw 2.

Installation
Establish the lever of an independent suspension bracket on the case of the forward bridge ahead and behind.
Freely twirl the screw with a nut.
Freely twirl the screw 2.
Establish directing hinge on a rotary fist.
Tighten a new nut of 60 N · m.
Fix the lever of an independent suspension bracket on the case of the forward bridge ahead and behind.
Tighten the screw with a nut of 3 90 N · m + 75 ° +15 °.
Freely tighten the screw 2 90 H · m + 75 ° + 15 °.
Establish a forward wheel.

«on page back
4.4.2. Removal and installation of a rotary fist
on the following page»
4.4.4. Replacement of all rubber bearings of the stabilizer