Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.3. Running gear
4.4. Forward suspension bracket
4.5. Back suspension bracket
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








99e20293



4-1-obshhie-svedeniya.html

4.1. General information

Suspension bracket – a link between a body and wheels. Through it the forces influencing wheels are transferred to a body. The suspension bracket serves for decrease in dynamic loadings, reduction of fluctuations of a body, mitigation of blows of wheels about roughness of the road, provides stability and smoothness of a course of the car.
The forward suspension bracket consists of a rotary fist, a rack, a spring and the lever.
The lever shakes concerning a body. In the bottom lever the rubber plug is used. The top end of a rack is fixed on a body and consists of the bearing allowing a wheel to turn.
The lower part of a rotary fist is fixed on the spherical hinge which is connected to the lever by means of a bolt. At service of fastening of the lever to a body and a stabilizer insulator from a body be convinced that fixing bolts are weakened so that the lever at a kacheniye will get to extremely top provision of amplitude of a kacheniye which also is normal situation to which the lever when the car costs on the earth moves.

«on page back
4. Running gear
on the following page»
4.2. Wheels and tires