Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.3.1. General information
3.3.2. Hydrotransformer
3.3.3. Main transfer
3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
3.3.5. Designation of an automatic transmission (AF 13-II)
3.3.6. Check of a condition of transmission oil (AF13-II)
3.3.7. Check of pressure of oil (AF13-II)
3.3.8. Check of the item switch of the lever of gear shifting (AF13-II)
3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
3.3.10. Adjustment of the item switch of the lever of gear shifting (AF13-II)
3.3.11. Adjustment of hummock system of a drive of gear shifting (AF13-II)
3.3.12. Replacement of hummock system of a drive of gear shifting (AF13-II)
3.3.13. Replacement of the switch of the lock adaptation of the lever of gear shifting
3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
3.3.15. Replacement of the control unit of the check point electronic switch
3.3.16. Replacement of the filament lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








Магия воды: рыбацкий фольклор и связь с природой
99e20293



3-3-14-zamena-zhguta-provodov-v-uzle-rychaga-pereklyucheniya-peredach-af13-ii.html

3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)

Dismantle the average console.
Dismantle knot of the lever of gear shifting.
Unfasten an insert of the automatic block of the console (arrow) and to pull up.
Take out filament lamps with the boss from an insert of the automatic block of the console.
Pull out lamps from the boss.
Unfasten a plait of wires of a drive of gear shifting from the holder of a plait of wires 3.
Disconnect a cable collar 2.
Disconnect a weight wire from an earthing distributive block (shooter).
Wring out from a plait of wires a wire with spring contact of the push-button switch of modes "economic/sports" (contact 2 in the X51 socket) and the push-button switch of the winter program (contact 3, 4 and 5 in the X51 socket) by means of the MKM-923-22 adaptation.

NOTE
Keep order distributions of wires.

Disconnect the socket of wires 4 magnetic switches of the lock adaptation of the lever of gear shifting 5.
The socket of a plait of wires 1 unfasten from knot of the lever of gear shifting and to clean a plait of wires of a drive of gear shifting.
Attach the socket of wires of 1 magnetic switch of the lever of gear shifting 2.
Press a wire with spring contact of the push-button switch of modes "economic/sports" (contact 2 in the X51 socket) and the push-button switch of the winter program (contact 3, 4 and the 5th X51 socket) into the socket of a plait of wires.

NOTE
Keep order distributions of wires.

Fix the socket of a plait of wires in knot of the lever of gear shifting.
Attach a wire of weight of an earthing distributive block.
Fix filament lamps with the boss in an insert of the automatic block of the console.
Insert lamps into a cartridge.
Fix an insert of the automatic block of the console.
Fix a plait of wires of a drive of gear shifting in the holder of a plait of wires 5.
Fix a plait of wires of a drive of gear shifting by a cable collar 4.
Build in knot of the lever of gear shifting.
Establish the average console.
Check functions of ensuring reliability of the lever of gear shifting.

«on page back
3.3.13. Replacement of the switch of the lock adaptation of the lever of gear shifting
on the following page»
3.3.15. Replacement of the control unit of the check point electronic switch