Repair of Opel Corsa C, from 2000 to 2005 of release.
	1. Operation and car maintenance
	2. Engine
		2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
		2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
			2.2.1. Regulation of phases of a gazoraspredeleniye by impact on a camshaft of Z10XEP, Z12XE, Z14XEP (since the end 2004 till 2005 of release)
			2.2.2. Adjustment of phases of a gazoraspredeleniye (Z10XE, Z10XEP, without the conditioner)
			2.2.3. Replacement of a poliklinovy belt (Z10XE, Z10XEP, with the conditioner)
			2.2.4. Head of the block of cylinders
			2.2.5. Removal and GRM case installation (Z10XE, Z10XEP)
			2.2.6. Engine repair (Z10XE, Z10XEP, without the conditioner)
			2.2.7. Block of cylinders, krivoshipno-shatunny mechanism and piston group
		2.3. Cooling system
		2.4. Greasing system
		2.5. Injection system
		2.6. Petrol engines – the general procedures of check
		2.7. Mechanical part of the engine
		2.8. Verifying and repair operations of components of a mechanical part of the engine
		2.9. Cooling system
		2.10. System of injection of fuel of petrol engines
		2.11. Greasing system
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Electric equipment schemes

2-2-4-golovka-bloka-cilindrov.html

2.2.4. Head of the block of cylinders

Help and repair values see the table are lower.

NOTE

Turning of a head of cylinders is not allowed.

Help and repair values

Help and repair values (head of the block of cylinders): 1–height of a head of the cylinder; 2–assembly height directing the valve; 3–assembly height of the valve; 4–width of a saddle of the valve in a head of cylinders; 5–a corner of a saddle of the valve in a head of cylinders; 6–diameter of a rod of the valve; 7–a corner of a saddle of the valve on the valve; 8–length of the valve; 9–diameter of a plate of the valve

«on page back
2.2.3. Replacement of a poliklinovy belt (Z10XE, Z10XEP, with the conditioner)

on the following page»
2.2.5. Removal and GRM case installation (Z10XE, Z10XEP)