|
2-10-9-zamena-trubki-zalivnojj-gorloviny-toplivnogo-baka-benzinovye-dvigateli.html
2.10.9. Replacement of a tube of a jellied mouth of a fuel tank (petrol engines)Removal
Open a cowl.
Disconnect the storage battery.
Disconnect a weight clip from a weight conclusion.
Disconnect a tube jellied mouths of a fuel tank. For this purpose open a cover of the hatch of a bulk mouth of a fuel tank (3)
Uncover a jellied mouth of a fuel tank.
Remove a rubber cover.
Unscrew a bolt.
Attach a stopper of a jellied mouth of a fuel tank.
Remove the right back wheel.
Lift the car half.
Remove the right back wheel.
Remove internal facing of a wheel arch, having unscrewed 2 bolts and two nuts.
Lift the car half.
Release a back collar of fastening of the exhaust silencer, for this purpose unscrew a fastening nut.
Remove the back exhaust silencer from an arm in 2 places.
Disconnect the back exhaust silencer from the central exhaust silencer.
Disconnect a plait of wires of the sensor of concentration of oxygen (management of catalytic converter).
Disconnect the socket of a plait of wires and unscrew 4 clips.
Disconnect a forward exhaust pipe with the forward exhaust silencer from catalytic converter having unscrewed 3 nuts of fastening.
Remove a forward exhaust pipe with the forward exhaust silencer.
Remove from an arm in 4 places.
Disconnect the socket of a plait of wires of the module in a tank.
Disconnect 2 топливопровода.
Disconnect 2 quick disconnect couplings.
Close the ends топливопроводов by means of special caps.
Remove a cable of lay brake system from an arm in 3 places.
Disconnect a tube jellied mouths of a fuel tank. For this purpose remove a collar and unscrew a fastening bolt.
Disconnect a fuel moisture separator from a tube of a jellied mouth of a fuel tank, having unscrewed a fastening bolt.
Clean a jack.
Remove 2 collars of fastening of a fuel tank, unscrew 4 bolts.
Remove a fuel tank with a tube of a jellied mouth of a fuel tank.
|
NOTE
The tube of a jellied mouth of a fuel tank should be passed over a back axis.
|
|
ATTENTION
Make sure that unions of a fuel tank are not damaged at a detachment of hoses.
|
Leak from the damaged unions can lead to a fire.
Disconnect a moisture separator from a tube of a jellied mouth of a fuel tank.
Disconnect 3 cable couplers.
Disconnect 2 ventilating hoses (4) and (5)
|
NOTE
Cut off on a dashed line a sharp knife.
|
Remove 2 ventilating hoses from an arm and disconnect them from a bulk pipe. in 4 places.
Disconnect a hose of supply of fuel from a tube of a jellied mouth of a fuel tank.
Weaken a fastening collar.
Installation
Attach a hose of supply of fuel to a tube of a jellied mouth of a fuel tank.
Fix a collar the moment of 3,5 N · m.
Attach a ventilating tube to a tube of a jellied mouth of a fuel tank.
Connect a ventilating tube.
Attach a fuel moisture separator.
Connect 2 ventilating hoses.
Remove 2 ventilating hoses from an arm.
Fix on a bulk pipe in 4 places.
Establish 3 cable couplers.
Establish a fuel tank with a tube of a jellied mouth of a fuel tank.
Attach 2 collars of fastening of a fuel tank.
Tighten 4 bolts of fastening the moment of 20 N · m.
Lift a jack.
Attach a fuel moisture separator to a tube of a jellied mouth of a fuel tank and tighten a fastening bolt.
Attach a tube of a jellied mouth of a fuel tank, tighten a bolt and fix a collar.
Establish a cable of lay brake system in an arm.
Connect 2 топливопровода.
Connect 2 quick disconnect couplings.
Connect the socket of a plait of wires of the module in a tank.
Establish a forward exhaust pipe with the forward exhaust silencer.
Attach a forward exhaust pipe with the forward exhaust silencer to catalytic converter, tighten the moment of 20 N · m.
Establish new laying.
Tighten 3 new nuts of fastening the moment of 20 N · m.
Connect the socket of a plait of wires of the sensor of concentration of oxygen (management of catalytic converter).
Establish the back exhaust silencer.
Attach the back exhaust silencer to the forward exhaust silencer.
Fix the back exhaust silencer and tighten a collar of fastening the moment of 18 N · m.
Lower the car half.
Establish internal facing of a back right wheel arch.
Establish the right back wheel.
Lower the car half.
Tighten the right back wheel.
Attach a tube of a jellied mouth of a fuel tank.
Remove a stopper of a jellied mouth of a fuel tank.
Establish a rubber cover.
Attach a stopper of a jellied mouth of a fuel tank.
Close a cover of the hatch of a bulk mouth of a fuel tank.
Connect the storage battery.
Connect a weight clip to a weight conclusion.
Program volatile memory.
Close a cowl.
| 