Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.3. Cooling system
2.4. Greasing system
2.5. Injection system
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Verifying and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.10.1. Removal and installation of fuel nozzles
2.10.2. Replacement топливопровода a high pressure (The pump of a high pressure – the pressure head chamber)
2.10.3. Module of the fuel pump
2.10.4. Replacement of the module of a dosage
2.10.5. Replacement of a regulator of pressure of fuel
2.10.6. Replacement of the dempfiruyushchy case of return of fuel
2.10.7. Fuel level sensor replacement
2.10.8. Fuel tank
2.10.9. Replacement of a tube of a jellied mouth of a fuel tank (petrol engines)
2.10.10. Catching system паров fuels
2.10.11. Replacement of a forward ventilating tube
2.10.12. Removal and capacity installation with absorbent carbon
2.10.13. Removal and installation of the sensor of a mass consumption of air
2.10.14. Release system (Z 14 XEP, Z 14 XEL, Z 16 XEP)
2.10.15. System of release (Z18 XE)
2.11. Greasing system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








99e20293 Эскорт в питере еще здесь.


2-10-12-snyatie-i-ustanovka-emkosti-s-aktivirovannym-uglem.html

2.10.12. Removal and capacity installation with absorbent carbon

Removal
Disconnect lines with use of the special KM-796-A tool.
Remove a forward right wheel
Remove protective facing, a wing,
Disconnect the socket of a plait of wires from a lamp of the index of turn on a wing and remove a lamp of the index of turn
Unscrew a bolt of fastening (shooter) and remove capacity with absorbent carbon.

Installation
Establish capacity with absorbent carbon and fix on a body.
Establish a lamp of the index of turn on a wing and attach the socket of a plait of wires to a lamp of the index of turn.
Establish protective facing, a wing.
Establish a wheel, tighten bolts of fastening the moment of 110 N · m.
Attach lines.
«on page back
2.10.11. Replacement of a forward ventilating tube		 on the following page»
2.10.13. Removal and installation of the sensor of a mass consumption of air