Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.3. Cooling system
2.4. Greasing system
2.5. Injection system
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Verifying and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.10.1. Removal and installation of fuel nozzles
2.10.2. Replacement топливопровода a high pressure (The pump of a high pressure – the pressure head chamber)
2.10.3. Module of the fuel pump
2.10.4. Replacement of the module of a dosage
2.10.5. Replacement of a regulator of pressure of fuel
2.10.6. Replacement of the dempfiruyushchy case of return of fuel
2.10.7. Fuel level sensor replacement
2.10.8. Fuel tank
2.10.9. Replacement of a tube of a jellied mouth of a fuel tank (petrol engines)
2.10.10. Catching system паров fuels
2.10.11. Replacement of a forward ventilating tube
2.10.12. Removal and capacity installation with absorbent carbon
2.10.13. Removal and installation of the sensor of a mass consumption of air
2.10.14. Release system (Z 14 XEP, Z 14 XEL, Z 16 XEP)
2.10.15. System of release (Z18 XE)
2.11. Greasing system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












2-10-4-zamena-modulya-dozirovki.html

2.10.4. Replacement of the module of a dosage

ATTENTION
At work with fuel system pay attention to purity as, even the smallest particles of dirt can result in malfunctions in operation of the engine or fuel system.

Removal
Open a cowl.
Disconnect the storage battery.
Disconnect connection with weight from a weight conclusion.

ATTENTION
The module of a dosage and area around should be cleared of konsistentny greasing.

ATTENTION
After removal, the module of a dosage and area around should be again cleared.

Remove the dosage module.
Disconnect the socket of a plait of wires.
Unscrew 3 bolts of fastening.

ATTENTION
Do not incline the dosage module.

Turn the module of a dosage and remove it holding horizontally.

Installation
Clear an opening and condensed surfaces, using a fabric without pile.
Establish the new module of a dosage.
Cover consolidation by pure engine oil.
Establish the dosage module horizontally and turn.
Tighten 3 bolts the moment of 6 N · m.
Fix the socket of a plait of wires.
Connect the storage battery
Attach connection with weight to a weight conclusion.
Program volatile memory.
Close a cowl.

«on page back
2.10.3. Module of the fuel pump
on the following page»
2.10.5. Replacement of a regulator of pressure of fuel