Toyota Land Cruiser, Amazon, LX470 Lexus
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Electric equipment of the engine
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear shifting box
+ Automatic Transmission (AT)
- Transfer case
Removal and installation of a transfer case
+ Transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of a transfer case
Details of installation of a transfer case
|
|
1. The car also establish to Poddomkratta it on props.
2. Give 3 bolts of fastening of the protection cover of a transfer case and remove it.
3. Merge oil from a transfer case.
4. Remove forward and back driveshafts (see the Head the Transmission line).
5. Disconnect knot of draft of the drive of management of a transfer case (address to an illustration above).
6. Remove a clamp, a washer, a wavy washer and the plug and disconnect knot of the shifting draft.
7. Turn out a bolt of the tire "weights" and remove it.
8. Prop up transmission by a rack.
|
|
Not to damage the pallet, lay a piece of a board. |
9. Give 8 bolts, 2 nuts and remove a cross beam.
10. Disconnect a ventilation hose, having remembered the provision of a clamp.
11. Disconnect the socket of the VSS sensor No. 1, 3 of the socket of sensors indicators of the mode of a transfer case and the socket of an electric motor of the actuation mechanism.
12. Slightly raise a transfer case and substitute under it a transmission rack.
13. Unfasten conducting from a transfer case.
14. Turn off 6 bolts of fastening of the adapter of a box and remove a transfer case down and back.
15. Installation is made upside-down. Track that all fixture was tightened according to requirements imposed in Specifications. |
|
|
|
