Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Features of a design
8.2. Hinged elements
8.2.1. Removal and installation of a front bumper
8.2.2. Removal and installation of the holder of a forward beam (blow limiter)
8.2.3. Replacement covered
8.2.4. Removal and installation of a protective covering in a wing
8.2.5. Removal and installation of a rear bumper
8.2.6. Removal and installation of a molding of an entrance aperture
8.2.7. Removal and installation of a forward protective level
8.2.8. Removal and water repeller installation
8.2.9. Replacement of additional consolidation of a frame of a roof
8.2.10. Removal and cowl installation
8.2.11. Removal and installation of the lock of a forward door
8.2.12. Removal and installation of the external handle of a forward door
8.2.13. Replacement directing glasses of an elevating window of a forward door
8.2.14. Removal and installation of an internal covering of a forward door
8.2.15. Remove and establish a level of a crack of a window regulator of a forward / back door inside
8.2.16. Removal and installation of a bracket of the lock of a forward door
8.2.17. Removal and installation of consolidation of a forward door
8.2.18. Removal and installation of a back door
8.2.19. Removal and installation of an internal covering of a back door
8.2.20. Removal and installation of consolidation of a back door
8.2.21. Removal and installation of a back folding door
8.2.22. Removal and installation of the lock of a back folding door
8.2.23. Removal and installation of the external handle of a back folding door
8.2.24. Removal and installation of a pneumatic spring of a back folding door
8.2.25. Removal and installation of consolidation of a back folding door
8.2.26. Removal and installation of an internal covering of a back folding door
8.2.27. Removal and installation of consolidation flew down in a back folding door
8.2.28. Replacement of an element of management of the external rear-view mirror regulated from within
8.3. Body glazing
9. Electric equipment schemes
 








99e20293



8-2-19-snyatie-i-ustanovka-vnutrennejj-obshivki-zadnejj-dveri.html

8.2.19. Removal and installation of an internal covering of a back door

Removal
Dismantle inside a triangular frame.
Dismantle a level of a crack of a window regulator of a forward/back door inside.
Dismantle a frame of the internal handle.
Dismantle an element of management of a window regulator.

NOTE
For a manual window regulator use KM-317-B for removal of the handle of a window regulator.

Remove and take out an internal covering of a forward door.
Turn off 4 screws of fastening (shooters).
Release 6 clips.

NOTE
Use for expression of fixing jams of the KM-569-A adaptation.

Installation
Establish an internal covering of a forward door.
Establish in the necessary situation and fix in clips an internal covering of a forward door.
Fix 6 clips tighten 4 screws of fastening.
Mount an element of management of a window regulator.

NOTE
For a manual window regulator use KM-317-B for removal of the handle of a window regulator.

Mount a frame of the internal handle.
Mount a level of a crack of a window regulator of a forward/back door inside.
Mount inside a triangular frame.

«on page back
8.2.18. Removal and installation of a back door
on the following page»
8.2.20. Removal and installation of consolidation of a back door