Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Features of a design
8.2. Hinged elements
8.2.1. Removal and installation of a front bumper
8.2.2. Removal and installation of the holder of a forward beam (blow limiter)
8.2.3. Replacement covered
8.2.4. Removal and installation of a protective covering in a wing
8.2.5. Removal and installation of a rear bumper
8.2.6. Removal and installation of a molding of an entrance aperture
8.2.7. Removal and installation of a forward protective level
8.2.8. Removal and water repeller installation
8.2.9. Replacement of additional consolidation of a frame of a roof
8.2.10. Removal and cowl installation
8.2.11. Removal and installation of the lock of a forward door
8.2.12. Removal and installation of the external handle of a forward door
8.2.13. Replacement directing glasses of an elevating window of a forward door
8.2.14. Removal and installation of an internal covering of a forward door
8.2.15. Remove and establish a level of a crack of a window regulator of a forward / back door inside
8.2.16. Removal and installation of a bracket of the lock of a forward door
8.2.17. Removal and installation of consolidation of a forward door
8.2.18. Removal and installation of a back door
8.2.19. Removal and installation of an internal covering of a back door
8.2.20. Removal and installation of consolidation of a back door
8.2.21. Removal and installation of a back folding door
8.2.22. Removal and installation of the lock of a back folding door
8.2.23. Removal and installation of the external handle of a back folding door
8.2.24. Removal and installation of a pneumatic spring of a back folding door
8.2.25. Removal and installation of consolidation of a back folding door
8.2.26. Removal and installation of an internal covering of a back folding door
8.2.27. Removal and installation of consolidation flew down in a back folding door
8.2.28. Replacement of an element of management of the external rear-view mirror regulated from within
8.3. Body glazing
9. Electric equipment schemes
 








Поради риболовлі
99e20293



8-2-11-snyatie-i-ustanovka-zamka-perednejj-dveri.html

8.2.11. Removal and installation of the lock of a forward door

NOTE
For cars without the central lock working operation of release and tightening of the socket of a plait of wires of the central lock disappears.

Removal
Remove an internal covering of a forward door.
Partially pull together a water-repellent film.
Release and remove the socket of a plait of wires of the central lock.
Dismantle the lock, turn off 3 screws крепленияа (arrows).
Dismantle the handle case.
Remove the lever mechanism: Bowden's cable of the internal handle of a forward door 1, Bowden's cable of the button of a stopper of the door lock 2.

Installation
Mount the lock.
Hang the lever mechanism: Bowden's cable of the internal handle of a forward door, Bowden's cable of the button of a stopper of the door lock.
Mount the handle case.
Attach the socket of a plait of wires of the central lock.
Paste a water-repellent film.
Establish an internal covering of a forward door.

«on page back
8.2.10. Removal and cowl installation
on the following page»
8.2.12. Removal and installation of the external handle of a forward door