|
3-3-4-regulirovka-trosa-selektora-pereklyucheniya-avtomaticheskojj-transmissii.html
3.3.4. Adjustment of a cable of the selector of switching of automatic transmissionLift and establish the car on supports or over a viewing hole.
The selector establish in the situation "R".
Wring out up a spherical support of a cable of the selector from a switching axis.
Switch the selector from the situation "R" in situation "1". Thus the drive should move easily. Otherwise replace a cable.
Switch the selector in the situation "R". Parking blocking should be thus included, forward wheels should not rotate.
In this situation the cable of the selector should without effort be pressed through on the lever of an axis of switching. Otherwise make cable adjustment.
Switch the selector in the situation "R".
Press a switching axis at a transmission in extreme back situation. Blocking of a parking should be fixed.
Unscrew a bolt of 3 support at a transmission a little. Displace a support so that the cable could be pressed through freely on the lever of an axis of switching. In this situation tighten a bolt the moment of 25 N · m.
Pass on the car and check operation of the selector. The engine can be started only in position of the R and N selector.
Include ignition. On the motionless car the selector should be deduced from the situation "R" or "N" only when the brake pedal is at the same time pressed.
Moments of an inhaling of carving connections
* Replacement of screws.
** Дорезать a carving and to screw screws with lock mastic. First of all, all screws evenly to tighten to 20 N · m.
*** Replacement of being self-stopped nuts.
| 