Repair of Opel Corsa C, from 2000 to 2005 of release.
	1. Operation and car maintenance
	2. Engine
	3. Transmission
		3.1. Coupling
		3.2. Mechanical box передч
		3.3. Automatic transmission
			3.3.1. General information
			3.3.2. Hydrotransformer
			3.3.3. Main transfer
			3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
			3.3.5. Designation of an automatic transmission (AF 13-II)
			3.3.6. Check of a condition of transmission oil (AF13-II)
			3.3.7. Check of pressure of oil (AF13-II)
			3.3.8. Check of the item switch of the lever of gear shifting (AF13-II)
			3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
			3.3.10. Adjustment of the item switch of the lever of gear shifting (AF13-II)
			3.3.11. Adjustment of hummock system of a drive of gear shifting (AF13-II)
			3.3.12. Replacement of hummock system of a drive of gear shifting (AF13-II)
			3.3.13. Replacement of the switch of the lock adaptation of the lever of gear shifting
			3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
			3.3.15. Replacement of the control unit of the check point electronic switch
			3.3.16. Replacement of the filament lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
		3.4. Driving mechanism
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Electric equipment schemes

Здесь купить печи от производителя.

3-3-12-zamena-trosovojj-sistemy-privoda-pereklyucheniya-peredach-af13-ii.html

3.3.12. Replacement of hummock system of a drive of gear shifting (AF13-II)

Dismantle the average console.

To put the cable channel 1 aside.

Unfasten the cable channel.

Wring out from a control lever a cable of a drive of gear shifting 3.

Release from the holder a cable of a drive of gear shifting.

Hook a lock clip the 2nd screw-driver.

Wring out (shooter) a cable of a drive of gear shifting from a control lever on the item switch of the lever of gear shifting.

Release from an emphasis a cable of a drive of gear shifting.

Hook a lock clip 1 screw-driver.

Delay a cable of a drive of gear shifting 3 from rubber consolidation 4 on the face panel.

NOTE

Watch that rubber consolidation did not descend from the face panel.

Insert from below via the face panel a cable of a drive of gear shifting 1 and as necessary lay it.

Moisten rubber consolidation 2 cables of a drive of gear shifting with soap solution.

Insert into an emphasis and fix in it a cable of a drive of gear shifting.

Push a lock clip.

NOTE

Watch correctness of fixing.

Press (shooter) a cable of a drive of gear shifting on a control lever of the item switch of the lever of gear shifting.

Press a cable of a drive of gear shifting 2 on the lever of gear shifting 3.

Insert a cable of a drive of gear shifting 2 in the holder in internal space of the car.

Fix a lock clip 1.

Fix the cable channel 4.

Establish the average console.

Adjust hummock system of a drive of gear shifting.

Check functions of ensuring reliability of the lever of gear shifting.