Repair of Opel Corsa C, from 2000 to 2005 of release.
	1. Operation and car maintenance
	2. Engine
	3. Transmission
		3.1. Coupling
		3.2. Mechanical box передч
		3.3. Automatic transmission
			3.3.1. General information
			3.3.2. Hydrotransformer
			3.3.3. Main transfer
			3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
			3.3.5. Designation of an automatic transmission (AF 13-II)
			3.3.6. Check of a condition of transmission oil (AF13-II)
			3.3.7. Check of pressure of oil (AF13-II)
			3.3.8. Check of the item switch of the lever of gear shifting (AF13-II)
			3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
			3.3.10. Adjustment of the item switch of the lever of gear shifting (AF13-II)
			3.3.11. Adjustment of hummock system of a drive of gear shifting (AF13-II)
			3.3.12. Replacement of hummock system of a drive of gear shifting (AF13-II)
			3.3.13. Replacement of the switch of the lock adaptation of the lever of gear shifting
			3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
			3.3.15. Replacement of the control unit of the check point electronic switch
			3.3.16. Replacement of the filament lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
		3.4. Driving mechanism
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Electric equipment schemes

3-3-13-zamena-vyklyuchatelya-stopornogo-prisposobleniya-rychaga-pereklyucheniya-peredach.html

3.3.13. Replacement of the switch of the lock adaptation of the lever of gear shifting

Dismantle knot of the lever of gear shifting.

Remove cable collars 3.

Remove a wire of weight (shooter) from an earthing distributive block.

Disconnect the socket of a plait of wires 4 magnetic switches of the lock adaptation of the lever of gear shifting 5.

Lock washer 2 remove from the console of the lever of gear shifting.

Wring out the contact switch of the lock adaptation of the lever of gear shifting 1 from the console of the lever of gear shifting.

Press the contact switch of the lock adaptation of the lever of gear shifting 1 into the console of the lever of gear shifting.

NOTE

Observe assembly situation.

Fix the contact switch of the lock adaptation of the lever of gear shifting by new lock washers 2.

Attach the socket of a plait of wires 4 magnetic switches of the lock adaptation of the lever of gear shifting 5.

Attach a wire of weight (shooter) of an earthing distributive block.

Fix a plait of wires by means of a new cable collar 3.

Build in knot of the lever of gear shifting.

Check functions of ensuring reliability of the lever of gear shifting.