Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Lighting system
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the filament lamp of a driving beam
7.2.6. Replacement of the filament lamp of a passing beam
7.2.7. Replacement of the filament lamp of xenon headlights
7.2.8. амена filament lamps of the index of turn (a xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp driving beam / lamp of lay fires (a xenon headlight)
7.2.11. Replacement of a filament lamp / lamp of illumination of a luggage carrier or luggage compartment
7.2.12. Removal and installation of lighting registration plates / filament lamps
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / filament lamps
7.2.15. Removal and installation of the back lamp of the salon / filament lamp
7.2.16. Removal and lighter / filament lamp installation
7.3. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












7-2-7-zamena-lampy-nakalivaniya-ksenonovykh-far.html

7.2.7. Replacement of the filament lamp of xenon headlights

Removal

ATTENTION
It is impossible to touch elements of a xenon passing beam at the included passing beam. Switch off ignition and light switch.
The central socket of a plait of wires of headlights should be disconnected.

Dismantle headlights.
Dismantle the module of ignition of a xenon headlight.
Unblock and remove a zashchiny cap of a xenon headlight.
Unscrew the puskoreguliruyushchy device of a xenon lamp 1.
Dismantle a xenon lamp 3х unscrew the screw from a lock ring 1.
Remove a lock ring.
Remove a xenon lamp 2.

Installation
Establish a xenon lamp.

NOTE
Pay attention to coding.

Insert a lock ring, tighten the screw of a lock ring. OPEL CORSA 2427
Establish the module of ignition of a xenon headlight.
Connect the puskoreguliruyushchy device of a xenon lamp and fix.
Establish a protective cap of a xenon lamp.
Adjust headlights.
Inspect work of lamps.

«on page back
7.2.6. Replacement of the filament lamp of a passing beam
on the following page»
7.2.8. амена filament lamps of the index of turn (a xenon headlight)