Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Lighting system
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the filament lamp of a driving beam
7.2.6. Replacement of the filament lamp of a passing beam
7.2.7. Replacement of the filament lamp of xenon headlights
7.2.8. амена filament lamps of the index of turn (a xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp driving beam / lamp of lay fires (a xenon headlight)
7.2.11. Replacement of a filament lamp / lamp of illumination of a luggage carrier or luggage compartment
7.2.12. Removal and installation of lighting registration plates / filament lamps
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / filament lamps
7.2.15. Removal and installation of the back lamp of the salon / filament lamp
7.2.16. Removal and lighter / filament lamp installation
7.3. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












7-2-10-zamena-lampy-dalnego-sveta-lampy-stoyanochnykh-ognejj-ksenonovaya-fara.html

7.2.10. Replacement of a lamp driving beam / lamp of lay fires (a xenon headlight)

ATTENTION
It is impossible to touch elements of a xenon passing beam at the included passing beam. Switch off ignition and light switch. The central socket of a plait of wires of headlights should be disconnected.

Removal
Dismantle headlights.
Remove a protective cap of 1 distant light / lay fires.
Dismantle the filament lamp of a driving beam, disconnect the socket of a plait of wires 3 from a food.
Unblock and open a fixing bracket 2.
Remove the filament lamp 5.
Dismantle the filament lamp of lay fires.
Unblock a cartridge 4 and remove with the filament lamp.
Remove the filament lamp from the boss.

Installation
Establish the filament lamp of lay fires.
Insert the filament lamp into a cartridge.
Insert a cartridge with the filament lamp.
Establish the filament lamp of a driving beam.

NOTE
Pay attention to coding.

Insert the filament lamp.
Fix a fixing bracket, connect the socket of a plait of wires.
Insert a protective cap of distant light / lay fires
Establish headlights.
Adjust headlights.

«on page back
7.2.9. Removal and installation of a starter of a xenon lamp
on the following page»
7.2.11. Replacement of a filament lamp / lamp of illumination of a luggage carrier or luggage compartment