Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Lighting system
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the filament lamp of a driving beam
7.2.6. Replacement of the filament lamp of a passing beam
7.2.7. Replacement of the filament lamp of xenon headlights
7.2.8. амена filament lamps of the index of turn (a xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp driving beam / lamp of lay fires (a xenon headlight)
7.2.11. Replacement of a filament lamp / lamp of illumination of a luggage carrier or luggage compartment
7.2.12. Removal and installation of lighting registration plates / filament lamps
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / filament lamps
7.2.15. Removal and installation of the back lamp of the salon / filament lamp
7.2.16. Removal and lighter / filament lamp installation
7.3. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












7-2-2-regulirovka-protivotumannykh-far.html

7.2.2. Adjustment of fog lights

Adjustment
To check/correct pressure of air in tires. Regulation is carried out at own mass of the car with one person or cargo of 75 kg on sitting of the driver. See also working process «Check and adjustment of headlights».
To adjust fog lights it is possible by means of an adjusting bolt of fastening 1 on the top border light darkness with device use for adjustment. The border passes light darkness thus horizontally along the adjusting line.
The inclination of fog lights makes 20 cm on 10 m (corresponds to an inclination of a beam of light 2 %).
Removal and installation of headlights
Removal
Dismantle a forward covering.
Dismantle headlights.
Unblock and disconnect the socket of a plait of wires, unscrew the screw (shooters).

Installation
Establish headlights.
Connect the socket of a plait of wires, tighten the screw.
Establish a forward covering.
Adjust headlights.

«on page back
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
on the following page»
7.2.3. Removal and installation of headlights