Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Lighting system
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the filament lamp of a driving beam
7.2.6. Replacement of the filament lamp of a passing beam
7.2.7. Replacement of the filament lamp of xenon headlights
7.2.8. амена filament lamps of the index of turn (a xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp driving beam / lamp of lay fires (a xenon headlight)
7.2.11. Replacement of a filament lamp / lamp of illumination of a luggage carrier or luggage compartment
7.2.12. Removal and installation of lighting registration plates / filament lamps
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / filament lamps
7.2.15. Removal and installation of the back lamp of the salon / filament lamp
7.2.16. Removal and lighter / filament lamp installation
7.3. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








99e20293



7-2-5-zamena-lampy-nakalivaniya-dalnego-sveta.html

7.2.5. Replacement of the filament lamp of a driving beam

Removal
Dismantle the filament lamp of a driving beam 1.
Turn off a protective cap (shooter).
Disconnect the plait socket проводов2.
Remove forward (shooter) a spring bracket from a holding ledge and incline aside.
Remove the filament lamp.

Installation
Establish the filament lamp of a driving beam.
Fix a spring bracket.
Connect the socket of a plait of wires.
Insert and fix a protective cap.
Fix a protective cap.

«on page back
7.2.4. Removal and installation of back fog lights
on the following page»
7.2.6. Replacement of the filament lamp of a passing beam