Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.3. Cooling system
2.3.1. Filling of system of cooling to fill and air removal (Z10XE, Z10XEP)
2.3.2. Replacement of the sensor of temperature of cooling liquid (Z10XE, Z10XEP, without the conditioner)
2.3.3. Removal and installation of the pump of cooling liquid (Z10XE, Z10XEP, with the conditioner)
2.3.4. Removal and thermostat installation with a branch pipe of cooling liquid (Z10XE, Z10XEP, without the conditioner)
2.3.5. Radiator replacement (Z10XE, Z10XEP, with the conditioner)
2.4. Greasing system
2.5. Injection system
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Verifying and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.11. Greasing system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












2-3-2-zamena-datchika-temperatury-okhlazhdayushhejj-zhidkosti-z10xe-z10xep-bez-kondicionera.html

2.3.2. Replacement of the sensor of temperature of cooling liquid (Z10XE, Z10XEP, without the conditioner)

Removal
Open a cowl.
Dismantle the sensor of temperature of cooling liquid 1.
Substitute the reception pallet.
Disconnect the socket of a plait of wires.

Installation
Establish the sensor of temperature of cooling liquid.
Replace a sealing ring.
Tighten the sensor of temperature of cooling liquid the moment of 18 N · m.
Connect the socket of a plait of wires.
Check and if necessary modify level of cooling liquid.
Close a cowl.

«on page back
2.3.1. Filling of system of cooling to fill and air removal (Z10XE, Z10XEP)
on the following page»
2.3.3. Removal and installation of the pump of cooling liquid (Z10XE, Z10XEP, with the conditioner)