Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
1.1. Car description
1.2. Keys, locks of the doors, opening elements of a body
1.3. Governing bodies, combination of devices, light and sound alarm system
1.4. Seats
1.5. System of passive safety
1.6. Heating and air conditioning
1.6.1. A heating system and ventilation with the additional conditioner
1.6.2. Climate control
1.6.3. Conditioner
1.6.4. Heating of seats
1.6.5. Inclusion signaling devices in keys
1.6.6. Management of climate control
1.6.7. Air inlet
1.7. Driving and car service
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








99e20293



1-6-6-upravlenie-klimat-kontrolem.html

1.6.6. Management of climate control

Provides the maximum comfort under any weather conditions and external temperature at any time years.
To provide constant and cozy climate in the car, automatic adjustment of temperature of arriving air, and also an expense and air distribution depending on external atmospheric conditions is made.
Automatic compensation of changes of temperature at the expense of external influences, for example, sunshine is carried out.
At the included cooling (the conditioner compressor) cooling and air drainage is made.
If cooling or drainage is not required, for economy of fuel press the ESO key.
In an automatic mode climate control provides maintenance of optimum parameters practically in any conditions. If necessary parameters of climate control can be adjusted manually.
Functions kpimat-kontropya are in full available only at the working engine.
At low external temperatures cooling (the conditioner compressor) is automatically switched off.

Automatic mode
Initial installation for the maximum comfort:
– press the AUTO key;
– open all nozzles обдува;
– turn on the conditioner compressor;
– by means of a regulator previously establish temperature on 22 °C.
It is possible to establish if necessary set temperature on higher or lower value.
At shutdown of the compressor of the conditioner (on the display "ESO" inscription will be displayed) comfort and safety level can go down.
All nozzles обдува in an automatic mode are regulated automatically therefore they should be constantly open.

The set temperature
The set temperature it is possible establish by means of the left regulator on values from 16 °C to 28 °C.
For reasons of comfort change the set temperature only to small values.
At installation of temperature below 16 °C on the indicator of the conditioner «LO» is displayed: climate control constantly works with the maximum capacity of cooling; regulation of temperature is not made.
At installation of temperature is higher 28 «With on the indicator of the conditioner «HI» is displayed: climate control constantly works with the maximum capacity of heating; regulation of temperature is not made.
Installation of the set temperature after switching off of ignition remains written down in memory.

Installations manually
In exceptional circumstances (for example, at an icing or a zapotevaniye of glasses) parameters of climate control can be adjusted manually.
The installations executed manually after switching off of ignition remain written down in memory.

Moisture and hoarfrost removal from glasses
Press a key, on the indicator of the conditioner there will be a badge.

ATTENTION
Non-compliance with the specified rules can lead to a zapotevaniye of glasses and failures as a result of visibility deterioration.

Temperature, distribution of air and having blown automatically are established so that quickly to defreeze and dry up glasses.
Return to an automatic mode: press a key or the AUTO key.

Heating of back glass, heating of external mirrors
Press a key on the indicator of the conditioner there will be a badge.

NOTE
Heating works only at the working engine.

Back glass and external mirrors are quickly released from hoarfrost and moisture.
Heating is automatically disconnected approximately in 15 minutes. For premature shutdown: repeatedly press a key.

Inclusion and switching off of the compressor of the conditioner
Press the ESO key, on the indicator of the conditioner there will be an ESO badge.
Mode for economy of fuel. In this mode cooling (the conditioner compressor) is switched off.
Cooling and moisture removal from arriving air is not made, at the expense of it the comfort provided by climate control is limited. It can lead, for example, to a zapotevaniye of glasses.
For return to an operating mode with cooling press the ESO key, the lamp on the indicator dies away.

Air distribution
Press one or several following keys, on the indicator of the conditioner there is the corresponding symbol:
: air distribution to a windscreen and to forward lateral glasses.
: air distribution to passengers of the car through adjustable nozzles обдува.
: air distribution in the bottom space of salon.
Return to an automatic mode: repeatedly press the corresponding keys or the AUTO key.

Consumption of air
The consumption of air is regulated by the right regulator. The established force обдува is shown columns.
For switching off обдува and together with it climate control turn the right regulator to the left until the indicator will go out.
For inclusion turn a regulator to the right.
For return to an automatic mode press the AUTO key.

Air circulation mode
The system of air circulation prevents penetration of external air into salon, pumping of internal air of salon is thus made.
Press a key on the indicator of the conditioner there will be a badge.
In an air circulation mode air exchange is limited. Quality of air in salon worsens over time, it can lead to the fatigue phenomena at passengers. Without cooling humidity of air increases in a mode, probably zapotevany glasses. Therefore a mode of air circulation include only for short time.
For switching off of a mode of air circulation repeatedly press a key.

Air conditioning at the idle engine
At the standing car and the switched-off ignition it is possible to use still available in system heat or, respectively, cold for air conditioning in salon, for example, at a stop before a railway crossing.
For this purpose press the AUTO key at the switched-off ignition, the set temperature appears on the conditioner indicator. The temperature is regulated by the left regulator.
Duration of air conditioning is limited.
For the premature termination press the AUTO key.

«on page back
1.6.5. Inclusion signaling devices in keys
on the following page»
1.6.7. Air inlet