Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
1.1. Car description
1.2. Keys, locks of the doors, opening elements of a body
1.3. Governing bodies, combination of devices, light and sound alarm system
1.4. Seats
1.5. System of passive safety
1.6. Heating and air conditioning
1.6.1. A heating system and ventilation with the additional conditioner
1.6.2. Climate control
1.6.3. Conditioner
1.6.4. Heating of seats
1.6.5. Inclusion signaling devices in keys
1.6.6. Management of climate control
1.6.7. Air inlet
1.7. Driving and car service
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








Лучшие индивидуалки Уфы.
99e20293



1-6-5-signalizatory-vklyucheniya-v-klavishakh.html

1.6.5. Inclusion signaling devices in keys

Having blown
Establish in the necessary situation a temperature regulator.
Include having blown, establish the necessary degree обдува.
For the maximum ventilation of the top space: establish the air distributor on, all nozzles are open.
For ventilation of the bottom space of salon: establish the air distributor on.
For simultaneous ventilation of the top and bottom space: establish the air distributor on.

Heating
The capacity of heating depends on temperature of cooling liquid and consequently reaches the maximum value only at the heated-up engine.
For fast warming up of salon turn a temperature regulator in red sector, include a step обдува 3, establish the air distributor in desirable situation.
Convenience, good health and comfort of passengers substantially depend on the correct installation of a mode of ventilation and heating.
To reach temperature distribution by a principle «the head in cold, and feet in heat», establish a rotary regulator of distribution of air in situation, or, establish the temperature switch on desirable temperature.

Heating of the bottom space
For heating of the bottom space turn a temperature regulator in red sector, include having blown and establish the air distributor on.

Moisture and hoarfrost removal from glasses

ATTENTION
Non-compliance with the specified rules can lead to a zapotevaniye of glasses and failures as a result of visibility deterioration.

Turn a temperature regulator against the stop in red sector.
Establish having blown on 3 or 4.
Establish the air distributor on.
Include heating of back glass.
On requirement direct lateral nozzles обдува on lateral glasses.
For simultaneous heating of the bottom space establish the air distributor in situation.

Air conditioning mode
Switch off an air circulation mode.
Establish desirable extent of cooling.
Establish in the necessary situation a temperature regulator.
Include having blown, to adjust a consumption of air.
Establish the air distributor in situation or.
Open nozzles on requirement.
If temperature switch on the average range: warmer air arrives in the bottom space, and colder – up, warm air leaves from lateral snuffled обдува, and colder – from averages.

Maximum cooling
For short time open windows and a sliding roof quicker to remove heated-up air.
Include an air circulation mode
Include cooling.
Turn a temperature regulator against the stop in dark blue sector (more cold).
Establish having blown on 4.
Establish a regulator of the distributor of air in situation.
Open all nozzles.

Moisture removal from glasses
To eliminate a zapotevaniye of glasses, for example, in crude weather or from damp clothes include cooling.
Establish in the necessary situation a temperature regulator.
Include having blown, to adjust a consumption of air.
Establish the air distributor on, the system of air circulation will be switched off automatically if after system work at the previous mode in it there is a moisture, glasses can mist over. For prevention of it it is necessary to establish before start-up of the engine air distribution in situation, and approximately through 5 with the ambassador of start-up – in situation.
Include heating of back glass.
Non-compliance with the specified rules can lead to a zapotevaniye of glasses and failures as a result of visibility deterioration.

Hoarfrost removal from glasses
Switch off cooling.
In establish in the necessary situation a temperature regulator.
Adjust on requirement having blown.
Establish the air distributor on, the system of air circulation will be switched off automatically.
Open lateral nozzles обдува.
Include heating of back glass.
The mode with cooling (the cooling compressor) at low external temperature does not join.

«on page back
1.6.4. Heating of seats
on the following page»
1.6.6. Management of climate control