Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. General procedures of check
6.3. Operations of adjustment and replacement of elements of brake system
6.3.1. Adjustment of lay brake system
6.3.2. Removal and installation of forward brake hoses
6.3.3. Replacement of tubes of brake system
6.3.4. Removal and installation of an overlay of brake shoes of a forward wheel
6.3.5. Removal and installation of a protective casing of a brake of a forward wheel
6.3.6. Replacement of a brake disk of a forward wheel
6.3.7. Removal and installation of a brake board of a back wheel
6.3.8. Removal and installation of brake shoes of a back wheel
6.4. Anti-blocking system (ABS 8.0 and ABS of 8.0 ESP)
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












6-3-4-snyatie-i-ustanovka-nakladki-tormoznykh-kolodok-perednego-kolesa.html

6.3.4. Removal and installation of an overlay of brake shoes of a forward wheel

NOTE
All slips brake shoes of one axis should be replaced.

Removal
Remove 2 forward wheels.
Remove the sensor of an overlay of a brake shoe from an internal overlay of a brake shoe if is available.
Remove fixing spring of the lever from a brake support a screw-driver.
Remove dustproof caps of protective plugs of directing bolts.
Unscrew directing bolts of a brake support.
Remove a brake support with directing blocks.
Remove an external slip brake blocks from a brake support and an internal overlay of a brake shoe with a holding collar from pistons.
Check overlays of brake shoes and brake disks.
Clear directing (arrows) in a soft metal brush directing blocks.
Cover directing with protivoskripny structure.
Drown the piston inside.

NOTE
Level of brake liquid in a tank of a hydraulic actuator of brake system raises. In case of need, pump out brake liquid a pear. If the brake support escapes or the protective cover on a brake support is damaged: repair the brake mechanism.

Installation
Establish an internal slip brake blocks in the piston and fix a holding collar.

NOTE
At installation of overlays of brake shoes, track that shooters on a back surface of a slip specified in the direction of rotation of a brake disk at car movement forward.

Establish an external overlay of a brake shoe in a brake support.
Establish a brake support on directing blocks with blocks.

NOTE
Be convinced of that the brake hose is not overwound.

Attach a brake support to directing blocks and tighten the moment of 28 N · m.
Establish dustproof caps.
Establish fixing spring to a support.
Attach the sensor of wear of an overlay of a brake shoe to an internal overlay of a brake shoe if is available.
Establish forward wheels and tighten the moment of 110 N · m.
Several times press a brake pedal.
Fill up brake liquid to "MAX" label.

«on page back
6.3.3. Replacement of tubes of brake system
on the following page»
6.3.5. Removal and installation of a protective casing of a brake of a forward wheel