Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.2.1. Repair of wheels and tires
4.2.2. Condition of tires
4.2.3. Replacement of tires
4.2.4. Tires which are not afraid of punctures (tire "RunFlat")
4.2.5. Identification ободьев and tires
4.3. Running gear
4.4. Forward suspension bracket
4.5. Back suspension bracket
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








learn 99e20293



4-2-2-sostoyanie-shin.html

4.2.2. Condition of tires

NOTE
To provide safety, it is necessary to replace tires at height of drawing of a protector of 2-3 mm. Minimum admissible under the law the height of drawing of a protector (1,6 mm) is reached, when the protector wears out to the wear index. Some indexes of wear are put at identical distance from each other in deepenings of a running surface. Their situation is noted also by indexes on боковине tires.

All cars made by Opel/GM, are equipped with indexes of wear of tires. Concerning use of chains of antisliding see hl. 1 "Operation manual".
In case of tires with the drawing of a protector connected with the direction of rotation, at replacement of tires pay attention to designation of the direction of rotation. Replace tires only coaxially.

«on page back
4.2.1. Repair of wheels and tires
on the following page»
4.2.3. Replacement of tires