Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Pumping of a hydraulic drive of coupling (a transmission – F13/F17 + / F23)
3.1.3. Removal, check and installation of a persistent plate and a conducted disk of coupling (without SAC)
3.1.4. Replacement of a pedal of coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












3-1-4-zamena-pedali-scepleniya.html

3.1.4. Replacement of a pedal of coupling

Removal
Remove facing of a steering column.
Remove light switch.
Press light switch at the left, turn clockwise and remove it.
Remove the bottom overlay of the dashboard, having unscrewed 4 bolts of fastening.
Disconnect the operating switch of coupling.
Disconnect a returnable spring from a coupling pedal
Disconnect a coupling pedal from the main cylinder of coupling.
Unbend up a screw-driver and disconnect a clamping level.
Unscrew a pedal bolt.
Disconnect a pedal support from a cross-piece.
On cars with the left arrangement of a steering unscrew 2 bolts of fastening.
On cars with the right arrangement of a steering unscrew a fastening nut.
Disconnect a pedal support from the main cylinder of coupling, having unscrewed 2 nuts of fastening.
Move back main cylinder of coupling.

NOTE
Do not damage plaits of wires and the attached elements.

Remove a pedal support accurately assembled with a coupling pedal.

Installation
Establish a pedal support with a coupling pedal.

NOTE
At installation use new bolts.

Attach a pedal support to a cross-piece, having tightened 2 nuts of fastening the moment of 20 N · m.

NOTE
Use new nuts.

Attach a coupling pedal to the main cylinder of coupling.
Attach a clamping level.

NOTE
Use a new clamping level.

Attach a returnable spring to a coupling pedal.
Attach the operating switch of coupling.
Establish the bottom overlay of the dashboard.
Establish the switch of light and turn counter-clockwise.
Establish a casing of a steering column.


«on page back
3.1.3. Removal, check and installation of a persistent plate and a conducted disk of coupling (without SAC)
on the following page»
3.2. Mechanical box передч