Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Features of a design
8.1.1. Central and door locks
8.2. Hinged elements
8.3. Body glazing
9. Electric equipment schemes



8.1.1. Central and door locks

Blocking of doors and other knots is carried out by the executive mechanisms working from the onboard power supply network. The central blocking of doors includes the separate locking modules mounted on the general arm at doors.
The central module is established below before a seat of the driver in E-boxing. In order that it to dismantle it is necessary to remove the left overlay of a floor and to lift an upholstery.
Handles of all doors act in film equally. Ahead in the handle the lock cylinder is built in. On cars with remote control the cylinder of the lock is established only at doors of the driver, at doors of the passenger instead of the cylinder there is a cap.
To remove the cylinder of the lock it is necessary to weaken an arm with all elements (the lock, the loudspeaker, the central blocking and the window regulator mechanism).

«on page back
8.1. Features of a design
on the following page»
8.2. Hinged elements