Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.3. Running gear
4.4. Forward suspension bracket
4.5. Back suspension bracket
4.5.1. Check of an angular gap of knot of the wheel bearing
4.5.2. Removal and installation of the back bridge
4.5.3. Removal and stabilizer installation
4.5.4. Removal and installation of the back shock-absorber
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








99e20293 шлюхи в спб.



4-5-1-proverka-uglovogo-zazora-uzla-kolesnogo-podshipnika.html

4.5.1. Check of an angular gap of knot of the wheel bearing

Remove a brake disk of a back brake.
Establish the adaptation KM-468-B 2 or KM-6610 with two wheel bolts 1 on a nave of a wheel of knot of the wheel bearing.
Establish the adaptation MKM-571-V 3 with a magnetic paw 4 on the back bridge.

NOTE
To establish measuring щуп the strelochny indicator (shooter) at external edge of a circle of openings on a drum-type nave.

Check a gap, having a little wrung out the KM-468-B or KM-6610 adaptation.
Admissible angular gap Max.: 0,1 mm.

NOTE
At excess of this size knot of the wheel bearing it is necessary to replace I.

Remove the adaptation MKM-571-B 1 with a magnetic paw 3.
Remove the adaptation KM-468-B 2 or KM-6610 from a nave of a wheel of knot of the bearing of a wheel.
Establish a brake disk of a back brake.

«on page back
4.5. Back suspension bracket
on the following page»
4.5.2. Removal and installation of the back bridge