1. Disconnect a negative wire from the battery.
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for input of the audio system in action! |
2. Merge cooling liquid. 3. Take off a generator drive belt. 4. Remove protection of a case and a radiator. 5. Remove a pump GUR pulley. 6. Mark brought to the generator an electrical wiring and tires of grounding and disconnect them from assembly. 7. Turn out adjusting and axial bolts, and also a lock nut from an adjusting level of the generator (address to an illustration above). 8. When replacing the generator take the block removed from the engine in shop, – replaceable has to correspond in accuracy to it on a standard size, plugs have to have identical marking, the size and an arrangement, the identification marking which is beaten out on the case, or put on Schild has to coincide. 9. The new / restored generators can be delivered on the market without driving pulley, – in that case the last should be rearranged from old assembly. 10. Installation is made upside-down. 11. In summary adjust effort of a tension of a driving belt (see the Head Nastroyki and routine maintenance of the car) and check charge tension (see the Section Check of a Condition of System of a Charge). |
|