Toyota Land Cruiser, Amazon, LX470 Lexus + Identification numbers of the car + Governing bodies and methods of safe operation of the car + Settings and routine maintenance of the car + Engine + Cooling systems of the engine, heating of salon and air conditioning + the Power supply system and production of the fulfilled gases + Electric equipment of the engine + Control systems of the engine and decrease in toxicity of the fulfilled gases + gear shifting Box + Transmission line + Brake system + Suspension bracket and steering + Body - Onboard electric equipment Search of causes of failures of electric equipment Safety locks - the general information Fusible inserts - the general information Chain breakers - the general information The relay - the general information and check of serviceability of functioning Digital tire of data of CAN Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system and switch of the last Replacement of the switch of indexes of the turn/switch of the modes of functioning of external illuminants Replacement of the switch of ignition and lock of blocking of a steering column Check of serviceability of functioning and replacement of the switch of the modes of functioning of screenwashes Replacement of lamps of head headlights Adjustment of the direction of optical axes of head headlights Removal and installation of block headlights Replacement of lamps Removal and installation of the audio system and its loudspeakers Removal and installation of the antenna of the radio receiver Check of serviceability of functioning, replacement of an electric motor of the drive of screen wipers and pump of washers Check of serviceability of functioning and replacement of the switch of heating of back glass Check of serviceability of functioning and recovery repair of a heater of back glass Removal and installation of a combination of devices Check of serviceability of functioning and replacement of horns of a horn The electric drive of external rear-view mirrors - general information and check of serviceability of functioning Control system of speed (tempostat) - general information, check of serviceability of functioning of components The electric drive of window regulators - general information and check of serviceability of functioning The uniform lock and system of remote control of door activators - general information and check of serviceability of functioning Running fires of light time of day (DRL) Safety cushions - the general information + Schemes of electric connections - the general information
|
Removal and installation of the antenna of the radio receiver
|
The description of procedure of dismantle of the antenna of external type is given below. Some models are equipped with the antenna pasted on a windshield, service of such antennas lies outside qualification of the average amateur mechanic and it has to be entrusted to specialists of car service.
|
The antenna with the fixed mast
|
1. By means of a small rozhkovy key of the suitable size turn out an antenna mast from the basis.
|
2. Give a nut of fastening of assembly of the basis of an antenna mast (address to an accompanying illustration), use flat-nose pliers for removal of lock rings. Having pulled, take outside an antenna cable (leave the string of the mast passed throughout an opening under installation which is tied up to a cable. Carefully remove all traces of dirt and a rust from a krepleniyaantenna place. |
3. Tie up a cable of the new antenna to a string and involve it in a body element. 4. Further installation is made as it should be the return to an order of dismantle of components. |
|
The antenna with an electrodriving mast
|
Performance of this procedure will require the help of the assistant. |
|
The system contains the relay. If the drive of the antenna ceased to function, first of all, check the relay. E / the drive motor seldom fails. |
|
1. If disconnected, connect the battery and turn the ignition key in the situation LOCK. 2. Give a nut of fastening of the basis of an antenna mast (address to an illustration above). 3. Further one person has to be in salon of the car, the second – to hold an antenna mast. Ask the assistant to press at the same time the AM/FM button on the control panel of the radio receiver and to turn the ignition key in situation ASS, the antenna mast has to move forward at all length of the course then it can be disconnected from a driving electric motor. Remove a mast, leave the ignition key in situation ASSORTMENT.
|
4a. Remove a loker of protection of a wheel arch of the corresponding wing of the car (see the Head Kuzov) and otboltit an electric motor of the drive of an antenna mast from a wing. Completely extend an antenna cable outside, having left the string which is tied up to it passed throughout an opening in a body element (address to an accompanying illustration). |
|
4b. Release three clamps and remove the panel of facing of a wheel arch, then give a fixing bolt and remove a driving electric motor (address to an accompanying illustration). |
|
4s. The socket of an electric motor of the drive of the antenna watch polarity of plugs on an accompanying illustration. |
5. Tie up a cable of the new antenna to the left string passed through the body panel and involve it back in salon of the car. 6. Establish an electric motor of the drive of an antenna mast on the regular place. 7. Establish an antenna mast, having developed a cable the gear party on the car forward. 8. Turn the ignition key in the situation LOCK, the cable has to be winded, and the mast, to be involved in a wing.
|
If the key for any reason was earlier transferred from situation ASS to the situation LOCK, repeat the procedure described in paragraph 8. If at turn of a key in the situation LOCK the cable does not start being taken up, move it on an entrance to the mechanism that the lower end was developed and it was taken by the coil. |
9. Screw a nut of fastening of the basis of an antenna mast even if the last was not up to the end involved in the wing panel. The mast has to be involved finally at a nazhimaniye on any of radio frequency range choice buttons on the control panel by the radio receiver. 10. Further installation is made as it should be the return to an order of dismantle of components. |
|
|
|