Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.3. Cooling system
2.4. Greasing system
2.5. Injection system
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Verifying and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.9.1. Filling and air removal from cooling system
2.9.2. Check of tightness of system of cooling
2.9.3. Removal and installation of the pump of cooling liquid
2.9.4. Replacement of an intermediate cooler
2.10. System of injection of fuel of petrol engines
2.11. Greasing system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












2-9-2-proverka-germetichnosti-sistemy-okhlazhdeniya.html

2.9.2. Check of tightness of system of cooling

Check
Open a cowl.

NOTE
Before procedure of check warm up the engine to working temperature (oil temperature – 80 °C).

Check level of cooling liquid and modify in case of need.
Establish the KM adapter 471 and the verifying equipment for a radiator, on a broad tank (follow instructions of the manufacturer).
Create in cooling system pressure about 100 kPas (1 bar).
Remove the test equipment and close a broad tank.
Close a cowl.

«on page back
2.9.1. Filling and air removal from cooling system
on the following page»
2.9.3. Removal and installation of the pump of cooling liquid