Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
2.3. Cooling system
2.4. Greasing system
2.5. Injection system
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Verifying and repair operations of components of a mechanical part of the engine
2.8.1. Gap check in a rod the bearing
2.8.2. Gap check in a rod the bearing
2.8.3. Replacement of the shatunny bearing
2.8.4. Replacement of piston rings
2.8.5. Piston replacement with a rod
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.11. Greasing system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 












2-8-4-zamena-porshnevykh-kolec.html

2.8.4. Replacement of piston rings

Remove the piston with a rod.
Remove flat-nose pliers for a piston ring remove piston rings.
Clear ring flutes.
Clear flutes of piston rings of a kompressionny ring of rectangular section, a conic kompressionny ring and a maslosjemny ring using the broken piston ring.
Check a gap.
Establish piston rings in the cylinder.
Check a gap the shchupy.
Check a vertical gap of a piston ring in a flute of a piston ring the shchupy.
Kompressionnoye ring of rectangular section.
Conic kompressionny ring.
Maslosjemnoye ring.
Establish piston rings.
Establish piston rings in the ring flutes, special nippers.
Marking of "TOP" should be from above.
Establish gaps of piston rings.
The first piston ring (the right ring) in situation 1.
The second piston ring in situation 4.
Intermediate ring of a maslosjemny ring in situation, disks of a maslosjemny ring in situation and/or 3.
Inflow on a rod should be turned towards a transmission.

«on page back
2.8.3. Replacement of the shatunny bearing
on the following page»
2.8.5. Piston replacement with a rod