Repair of Opel Corsa C, from 2000 to 2005 of release.
	1. Operation and car maintenance
	2. Engine
		2.1. Petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
		2.2. Mechanical part of petrol engines Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I
		2.3. Cooling system
		2.4. Greasing system
			2.4.1. Removal and installation of the case of the oil filter (Z10XE, Z10XEP, without the conditioner)
			2.4.2. Replacement of engine oil (Z10XE, Z10XEP)
			2.4.3. Removal and installation of the oil pallet (Z10XE, Z10XEP, without the conditioner)
			2.4.4. Replacement of the relay of pressure of oil (Z10XE, Z10XEP)
		2.5. Injection system
		2.6. Petrol engines – the general procedures of check
		2.7. Mechanical part of the engine
		2.8. Verifying and repair operations of components of a mechanical part of the engine
		2.9. Cooling system
		2.10. System of injection of fuel of petrol engines
		2.11. Greasing system
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Electric equipment schemes

2-4-4-zamena-rele-davleniya-masla-z10xe-z10xep.html

2.4.4. Replacement of the relay of pressure of oil (Z10XE, Z10XEP)

Removal

Open a cowl.

Dismantle the relay of pressure of oil 1.

Disconnect the socket of a plait of wires.

Substitute the reception pallet.

Clean sealing surfaces of a head of cylinders and the relay of pressure of oil.

Installation

Establish the relay of pressure of oil.

Replace a sealing ring.

The relay of pressure of oil tighten and tighten the moment of an inhaling of 20 N · m.

Attach the socket of a plait of wires.

Check and if necessary modify level of engine oil.

Close a cowl.

on the following page»
2.5. Injection system