|
7-3-4-zamena-oboikh-podshipnikov-stekloochistitelejj-s-rychazhnym-mekhanizmom.html
7.3.4. Replacement of both bearings of screen wipers with the lever mechanismRemoval
Dismantle a drainage guard.
Dismantle the electromotor of a forward screen wiper.
Unblock and disconnect the socket of a plait of wires of the electric motor of a forward screen wiper.
Dismantle lever the screen wiper mechanism with the electric motor, unscrew the screw (see fig. I).
Remove lever the mechanism from the handle of the lever mechanism of a forward screen wiper 1.
Turn off the handle from the electric motor, the electromotor from the lever mechanism, unscrew the screw (see fig. II).
Remove system of connecting levers.
Deduce from clips of 4 spherical heads with 1 on 3.
Installation
Establish the electromotor on lever the mechanism.
|
NOTE
Before handle installation on the electromotor of a screen wiper connect the screen wiper electromotor to a food and establish in extreme situation. Pay attention to the correct installation of the handle.
|
Insert the engine, tighten the screw.
Establish the handle.
Establish the electromotor of a forward screen wiper with the lever mechanism, tighten the screw.
Connect the socket of a plait of wires.
Establish system of connecting levers.
Fix in clips of 4 spherical heads.
Establish a drainage guard.
Establish levers of screen wipers of a windscreen, tighten a nut of fastening of 14 N · m.
Carry out the main adjustment of levers of screen wipers of a windscreen.
Main adjustment of levers of screen wipers of a windscreen
F 06 model
The party of the driver – about 5 cм;
The party of the passenger – about 4 cм.
F 08 model
The party of the driver – about 7 cм;
The party of the passenger – about 7 cм.
|
NOTE
Establish the screen wiper electromotor in a basic provision.
|
| 