Repair of Opel Corsa C, from 2000 to 2005 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. General procedures of check
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from a hydraulic actuator of working brake system
6.2.4. Brake hoses
6.3. Operations of adjustment and replacement of elements of brake system
6.4. Anti-blocking system (ABS 8.0 and ABS of 8.0 ESP)
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 








Душевые перегородки из HPL пластика 99e20293



6-2-2-proverka-urovnya-tormoznojj-zhidkosti-v-bachke-gidroprivoda-rabochejj-tormoznojj-sistemy.html

6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system

The tank for brake liquid is located in a motor compartment.
The tank has the transparent case therefore level of brake liquid can be supervised outside.
Level of brake liquid should be always closer to a label "MOVE".
If level of brake liquid too low, before removal of a stopper from a compensatory tank pure rags wipe a stopper and a place about a stopper from pollution to exclude their hit in a hydraulic contour of brakes.
Add the recommended brake liquid in a tank. Mixing of various types of brake liquid can damage hydraulic system.

«on page back
6.2.1. Check and adjustment of elements of brake system
on the following page»
6.2.3. Air removal from a hydraulic actuator of working brake system